You will receive on your e-mail all the news about the product, updating software and documentation!

WOP-2ac-LR5 base station

Key features

High-performance solution based on the Realtek chipset
Base station with support for 802.11a/n/ac (5G Wi-Fi)
Radio interface with MIMO 2x2 support
Up to 30 clients on a base station sector
Radio module power of up to 24 dBm

WОP-2ac-LR5 is designed to organize Broadband wireless networks in private housing, that provide broadband access to the Internet in a radius of 3 km and Triple Play services.
The device is a good choice for wireless network construction in a difficult climatic conditions. WOP-2ac-LR5 operates well in a wide operating temperature range and in high humidity (different climatic zones). The device allows connecting different sector antennas.

Scalability
The base station WОP-2ac-LR5 provides data rate of up to 867 Mbps on each interface due to the support for IEEE 802.11ac standard.
The base station WОP-2ac-LR5 – an up-to-date flexible solution that provides extending coverage zone due to its power of the transmitter (up to 24 dBm) and extending number of clients per base station due to 3 radio interfaces. It is possible to deploy wireless IT infrastructure fast and easily by virtue of high-performance hardware, scalability and intuitive interface.

Wireless connection
To ensure stable and uninterrupted operation, the device is equipped with high-performance Realtek chipsets providing high data processing rates and effective operating via FBWA
technology (Fixed Bandwidth Wireless Access). Furthermore, the support for MIMO technology and use of narrow-band antennas make the device a universal solution for broadband access network organization.

Performance
To ensure stable and uninterrupted operation, the device is equipped with high-performance Realtek chipsets providing high data processing rates and effective operating via FBWA technology (Fixed Bandwidth Wireless Access).

Security
The device uses up-to-date technologies of authentication to provide a secure connection. Particularly, it uses a dynamic key that is unique for each user device that interacts with WOP-2ac-LR5.

Power supply
The PoE+ technology makes it possible to install the equipment virtually anywhere, regardless of the power supply location, reduces total cost by discarding power cables and performs the installation easier and faster.

Interfaces

1 Combo-port 10/100/1000Base-T (Ethernet) / 100/1000Base-X (SFP)
2 SMA-type connectors (female) for external antennas (Omni, sector, rod, etc.)

WLAN capabilities

Support for IEEE 802.11a/n/ac
Data aggregation, including A-MPDU (Tx/Rx) и А-MSDU (Rx)
Priorities and packed planning based on WMM
Dynamic frequency selection (DFS)
Hidden SSID support
4 virtual access points
External access points detection
APSD
Polling
Spectrograph

Network function

Automatic negotiation of speed and duplex mode, switching over MDI and MDI-X modes
Support for VLAN
802.1X authentication support
DHCP-client
Support for ACL
Support for NTP

QoS functions

Packet priorities and planning based on profiles
Bandwidth limiting for each SSID

Security

Centralized authentication via RADIUS server (WPA/WPA2 Enterprise)
WPA/WPA2 encryption
64/128/152-bit WEP encryption of data

Wireless intarface parameters

Frequency range 5180–6150 MHz
CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulation
Support for MIMO 2х2
Wi-Fi Realtek RTL8812BRH chip
Bandwidth: 5, 10, 20, 40, 80 MHz

Operation channels¹

802.11a/n/ac: 36-230 (5180-6150 MHz)

Data rate²

802.11ac: up to 54 Mbps
802.11n: up to 300 Mbps
802/11ac: up to 867 Mbps

Receiver sensitivity

5 GHz: до -94 dBM

Maximum power of the transmitter¹

5 GHz: up to 24 dBm

Configuration

Remote control via Telnet, SSH
Web-interface
CLI
NETCONF

Physical specifications

Power consumption up to 6,5 W
Processor Realtek RTL8197FS
32 MB Flash
128 MB RAM
Power supply: PoE+ 48В/54В (IEEE 802.3at-2009)
Operating temperature from -45°С to +65°С
IP54 protection level
Dimensions (WxHxD): 88x232,5x47 mm
Pole mount

¹ The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
² The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth might be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data might decrease the real bandwidth. The environment might influence on the network coverage range.