WOP-2ac-LR2 base station

Overview
Specifications
Reviews
Key features
  • High-performance soluition based on the Realtek chipset
  • Base station with support for 802.11b/g/n (2.4G Wi-Fi)
  • Radio interface with MIMO 2x2 support 
  • Radio module power up to 26 dBm 
Base station
WОP-2ac-LR2 is designed to organize Broadband wireless networks in private housing, that provide broadband access to the Internet in the range of 3 km. The device is a good choice for wireless network construction in a difficult climatic conditions. WOP-2ac-LR2 operates well in a wide operating temperature range and in high humidity (different climatic zones). The device allows connecting different sector antennas

Scalability
The base station WОP-2ac-LR2 — an up-to-date flexible solution that provides extanded coverage zone due to its power of the transmitter (up to 26 dBm) and using of sector antennas. It is possible to deploy wireless IT infrastructure fast and easily by virtue of high-performance hardware, scalability and intuitive interface

Wireless connection
The base station WOP-2ac-LR2 provides data rate up to 300 Mbps due to the support for IEEE 802.11n standard. Furthermore, the support for MIMO technology and use of sector antennas make the device an universal solution for broadband access network organization

Performance
To ensure stable and uninterrupted operation, the device is equipped with high-performance Realtek chipsats providing high data processing rates and effective operating via FBWA (Fixed Bandwidth Wireless Access) technology
 
Security
The device uses up-to-date technologies of authentication to provide a secure connection. Particularly, WPA2 encryption is used, as well as centralized authorization through a RADIUS server (WPA2-Enterprise).

Power supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.
 
Interfaces
  • 1 Combo-port 10/100/1000Base-T (Ethernet) / 100/1000Base-X (SFP)
  • 2 SMA-type connectors (female) for external antennas (Omni, sector, rod, etc.)
WLAN capabilities
  • Support for IEEE  802.11b/g/n
  • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
  • Priorities and packed planning based on WMM
  • Hidden SSID support
  • 4 virtual access points
  • External access points detection
  • APSD
  • Spectrum analyzer
  • Support for wireless bridges (WDS) 
  • Polling
  • Support for central fixed frequency
Network function
  • Automatic negotiation of speed and duplex mode, switching over MDI and MDI-X modes
  • Support for VLAN (Access, Trunk, General)  
  • 802.1X authentication support
  • DHCP-client
  • Support for ACL
  • Support for NTP
  • Support for Syslog
QoS functions
  • Bandwidth limiting for each SSID
  • Client data rate limiting for each SSID
  • Changing WMM parameters for each radio interface
  • Support for prioritization by CoS and DSCP
Security
  • Centralized authentication via RADIUS server (WPA/WPA2 Enterprise)
  • WPA/WPA2 encryption
  • 64/128/152-bit WEP encryption of data
Wireless intarface parameters
  • Frequency range   2402–2482 MHZ
  • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM modulation
  • Support for MIMO 2х2
  • Wi-Fi Realtek RTL8197FS chip
  • Bandwidth: 5, 10, 20, 40 MHZ
Operating channels1
  • 802.11b/g/n: 1–13 (2402–2482 MHz)
Data rate2
  • 802.11b: up to 11 Mbps
  • 802.11g: up to 54 Mbps
  • 802.11n: up to 300 Mbps  
Receiver sensitivity
  • 2.4 GHz: up to -98 dBm  
Maximum power of the transmitter1
  • 2.4 GHz: 26 dBm  
Configuration
  • Remote control via Telnet, SSH
  • Web interface
  • CLI
  • NETCONF
  • SNMP (Monitoring)  
Physical specifications
  • Power consumption up to 13 W
  • Realtek RTL8197FS 1 GHz processor  
  • 32 MB Flash
  • 128 MB RAM
  • Power supply: 
    • PoE+ 48В/54В (IEEE 802.3at-2009)
  • Operating temperature from -45°С to +65°С
  • IP54 protection level
  • Dimensions (WxHxD): 88x232.5x47 mm
  • Pole mount

1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.

2The maximum wireless data rate is defined according to IEEE 802.11b/g/n standard. The real bandwidth might be different. Conditions of the network,
environment, the amount of traffic, building materials and constructions and network service data might decrease the real bandwidth. The environment
might influence on the network coverage range