You will receive on your e-mail all the news about the product, updating software and documentation!

Descriptions

wop_12ac_lr_datasheet_1.11.2_en.pdf

WOP-12ac-LR base station

Key features

High-performance solution based on Broadcom chipset
Base station with support for 802.11ac (5G Wi-Fi)
Centralized management and network monitoring
3 independent radio interfaces, MIMO 2x2:2
Up-to-date authentication and encryption means
Up to 30 clients on a base station sector
Radio module power of up to 27 dbm

Base station
WОP-12ac-LR is designed to organize Broadband access networks in private housing, that provide broadband access to the Internet in a radius of 3 km and Triple Play services.
The device is a good choice for wireless network construction in a difficult climatic conditions. WOP-12ac-LR operates well in a wide operating temperature range and in high humidity (different climatic zones). The device allows connecting different sector antennas.

Scalability
The base station WОP-12ac-LR – an up-to-date flexible solution that allows extending coverage zone due to its power of the transmitter (up to 27 dBm) and extending number of clients per base station (up to 150) due to 3 radio interfaces. It is possible to deploy wireless IT infrastructure fast and easily by virtue of high-performance hardware, scalability and intuitive interface.

Wireless connection
The base station WОP-12ac-LR provides data rate of up to 867 Mbps on each interface due to the support for IEEE 802.11ac standard. Furthermore, the support for MIMO technology and use of narrow-band antennas make the device a universal solution for broadband access network organization.

Security
The device uses up-to-date technologies of authentication to provide a secure connection. Particularly, it uses a dynamic key that is unique for each user device that interacts with WOP-12ac-LR.

Performance
To ensure a stable and uninterrupted operation, the device is equipped with high-performance Broadcom chipsets providing high data processing rates and effective operating via FBWA technology (Fixed Bandwidth Wireless Access).

Power supply
The PoE+ technology makes it possible to install the equipment virtually anywhere, regardless of the power supply location, reduce total cost by discarding power cables and perform the installation easier and faster.

Interfaces

2 Ethernet ports 10/100/1000Base-T (RJ-45)
1 port of 100/1000Base-X (SFP) – optionally
6 N-type connectors (female) for external antennas (Omni,
sector, rod, etc.)
Console (RJ-45)

WLAN capabilities

Support for IEEE 802.11a/n/ac
Data aggregation, including A-MPDU (Tx/Rx) и А-MSDU(Rx)
Priorities and packet planning based on WMM
Dynamic frequency selection (DFS)
Hidden SSID support
24 virtual access points
External access points detection
APSD
WDS

Network functions

Automatic negotiation of speed and duplex mode,switching over MDI and MDI-X modes
Support for VLAN
802.1X authentication support
DHCP client
Support for LLDP
Support for ACL
Support for IPv6

QoS functions

Packet priorities and planning based on profiles
Bandwidth limiting for each SSID
Modification of WMM parameters for each radio interface

Security

Centralized authentication via RADIUS server (WPA Enterprise)
WPA/WPA2 encryption
Support for Сaptive Portal
E-mail notifications on system events

Wireless interface parameters

Frequency range 5150–5850 MHz
CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
Support for 2х2 MIMO
3 integrated Broadcom chips – BCM43460 (IEEE802.11a/n/ac)

Operating channels¹

802.11a/n/ac: 36–64 (5180–5320 MHz),100–144 (5500–5720 MHz),149–165 (5745–5825 MHz).

Data rate²

802.11ac: 867 Mbps

Receiver sensitivity

5 GHz: up to -94 dBm

Maximum power of the transmitter¹

5 GHz: up to 27 dBm

Physical specifications

Power consumption up to 40 W
Processor Broadcom BCM53016/BCM58522
128 MB NAND Flash
256 MB RAM DDR3
Power supply: PoE+ 48V/54V (IEEE 802.3at-2009), DC 48V
Operating temperature from -40 С to +60 С
Dimensions (WxHxD): 247x97x241 mm

Configuration

Software updates and configuration trough DHCP autoprovisioning
Remote management via Telnet, SSH
Web interface
SNMP

______________________________________________________
¹ The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your
country.
² The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth might be different. Conditions of the
network, environment, the amount of traffic, building materials and constructions and network service data might decrease the real
bandwidth. The environment might influence on the network coverage range.