Ethernet Access Switch MES2424B

Overview
Specifications
Reviews
Key features
  • Non-blocking architecture
  • Advanced L2 features
  • L3 switches
  • Multicast (IGMP Snooping, MVR)
  • Advanced security features (L2-L4 ACL, IP Source Guard,Dynamic ARP Inspection, etc.)
  • Uninterruptible power supply from rechargeable battery
The Ethernet access switches provide end users connection to networks of large enterprises, small and mid-sized businesses and service providers via 1G/10G interfaces.

The switches support Virtual Local Area Networks (VLAN), multicast groups and advanced security functions.

Uninterruptible power
MES2424B switches can be equipped with a rechargeable battery to ensure power supply in case of the 220 V primary network connection loss. The switch is also equipped with a power supply unit which allows the battery to be charged when 220 V power is available. Power supply redundancy system makes it possible to monitor the state of the primary network and notify of a power type switching.
Interfaces
  • 10/100/1000BASE-T (RJ-45) - 24
  • 1000BASE-X(SFP)/ 10GBASE-R(SFP+) - 4
  • Console port RS-232 (RJ-45) - 1
Performance
  • Bandwidth - 128 Gbps
  • Throughput on 64-byte packets1 - 95.2 MPPS
  • Buffer memory - 1.5 MB
  • RAM (DDR3) - 512 MB
  • ROM (SPI Flash) - 64 MB
  • MAC table - 16384
  • ARP table - 1000
  • VLAN table - 4094
  • L2 Multicast groups (IGMP Snooping) - 1023
  • L3 Multicast groups(IGMP proxy) - 512
  • SQinQ rules - 1024 (ingress1), 512 (egress)
  • MAC ACL rules - 509
  • IPv4/IPv6 ACL rules - 384/192
  • L3 IPv4 Unicast routes - 496
  • L3 IPv6 Unicast routes - 124
  • VRRP routers - 32
  • L3 interfaces - 20 VLANs, up to 5 of IPv4 addresses for each VLAN, up to 124 of IPv6 GUA for all VLANs in summary
  • Link Aggregation Groups (LAG) - 24 groups, up to 8 ports in one LAG
  • QoS - 8 output queues with different priorities for each port
  • Jumbo frame size - 12288 bytes
Interface features
  • Head-of-line blocking (HOL) protection
  • Auto MDI/MDIX
  • Jumbo frames
  • Flow Control (IEEE 802.3X)
  • Port mirroring (SPAN, RSPAN)
МAC table
  • Independent learning mode per VLAN
  • MAC Multicast Support
  • Configurable aging time of MAC addresses
  • Static MAC Entries
  • MAC change events monitoring per ports
  • MAC Flapping logging
VLAN features
  • Voice VLAN
  • IEEE 802.1Q
  • Q-in-Q
  • Selective Q-in-Q
  • GVRP
  • MAC-based VLAN
  • Protocol-based VLAN
L2 Multicast features
  • Multicast profiles
  • Static Multicast groups
  • IGMP Snooping v1,2,3
  • IGMP Snooping fast leave
  • IGMP Proxy-report
  • IGMP authorization via RADIUS 
  • MLD Snooping v1,2
  • MLD Snooping fast-leave
  • IGMP Querier
  • MVR
L2 features
  • STP (Spanning Tree Protocol, IEEE 802.1d)
  • RSTP (Rapid Spanning Tree Protocol, IEEE 802.1d)
  • MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
  • Rapid-PVST+
  • STP Root Guard
  • STP Loop Guard
  • STP BPDU Guard
  • BPDU Filtering
  • Spanning Tree Fast Link option
  • Loopback Detection (LBD)
  • Port isolation
  • Storm Control for different types of traffic (broadcast, multicast, unknown unicast)
  • Layer 2 Protocol Tunneling (L2PT)
  • ERPS (G.8032v2)
L3 Multicast features
  • IGMP proxy (RFC 4605)
  • IGMP proxy fast-leave
L3 features
  • Static IPv4, IPv6 routes
  • Dynamic routing protocols RIPv1/2, OSPFv2/3
  • VRRP

Link Aggregation functions
  • Link Aggregation Groups (LAG)
  • LACP
  • LAG Balancing Algorithm
Service functions
  • Virtual cable Testing (VCT)
  • Optical transceiver diagnostics
IPv6 functions
  • IPv6 Host
  • Dual-stack IPv4, IPv6
    Security functions
    • DHCP Snooping
    • DHCP Option 82
    • MAC-based authentication, Port Security, static MAC entries
    • Port-based authentication IEEE 802.1x
    • Guest VLAN
    • DoS attacks prevention
    • Traffic segmentation
    • DHCP clients filtering
    • BPDU attacks prevention 
    • PPPoE Intermediate agent
    • IP Source Guard
    • Dynamic ARP Inspection
    • DHCPv6 Snooping
    • IPv6 Source Guard
    • IPv6 ND Inspection
    • IPv6 RA Guard
    ACL (Access Control List)
    • L2-L3-L4 ACL (Access Control List)
    • IPv6 ACL
    • ACL based on:
      • Switch port 
      • IEEE 802.1p priority
      • VLAN ID
      • EtherType
      • DSCP
      • IP protocol 
      • TCP/UDP port number
      • User Defined Bytes
    Quality of service (QoS) and rate limiting
    • Port rate limiting (shaping)
    • Rate limiting (policing) according to sr-TCM and tr-TCM
    • IEEE 802.1p Class of Service (CoS)
    • Strict Priority/Weighted Round Robin (WRR)  scheduling algorithms
    • Setting the IEEE 802.1p priority for management VLAN
    • ACL-based traffic classification
    • ACL-based CoS/DSCP marking
    • DSCP to CoS remarking 
    • CoS to DSCP remarking 
    • ACL-based VLAN assignment
    OAM
    • IEEE 802.3ah, Ethernet OAM
    • IEEE 802.3ah Unidirectional Link Detection (UDLD)
    Main management functions
    • Configuration file download and upload file via TFTP/SFTP
    • Automated backup of configuration file via TFTP/SFTP
    • Simple Network Management Protocol (SNMP)
    • Command Line Interface (CLI)
    • Web interface
    • Syslog
    • SNTP (Simple Network Time Protocol)
    • Traceroute
    • LLDP (IEEE 802.1ab) + LLDP MED
    • Two IEEE 802.1Q headers traffic control
    • Commands Authorization using TACACS+ server
    • IPv4/IPv6 ACL support for device control 
    • Switch access management — privilege levels for users
    • Management interface blocking
    • Local authentication
    • IP addresses filtering for SNMP
    • RADIUS and TACACS+ (Terminal Access Controller Access Control System) clients 
    • Telnet client, SSH client