Ethernet Access Switch MES2410-08DP

• Bandwidth up to 80 Gbps
• Up to 24 ports of 2.5GBASE-T
• Advanced L2 features
• L3 switches
• Support for Multicast (IGMP Snooping, MVR)
• Advanced security functions (L2-L4 ACL, IP Source Guard, Dynamic ARP Inspection and etc.)

MES2410 series switches provide end users connection to networks of large enterprises, small and mid-sized businesses and service providers via 2.5G/10G interfaces. MES2410-08DP devices support PoE according to the IEEE 802.3bt/PoE+ standard (up to 30 W per port). The switches support VLANs, multicast groups, and have an advanced set of security features.

Interfaces

• 10/100/1000/2500BASE-T PoE/PoE+ - 8
• 1000BASE-X (SFP)/10GBASE-R (SFP+) - 2
• Console port RS-232 (RJ-45) - 1

Performance

• Bandwidth - 79.8 Gbps
• Throughput for 64-byte packets - 59.52 MPPS
• Buffer memory - 1.5 MB
• RAM (DDR3) - 1 GB
• ROM (SPI Flash) - 64 MB
• MAC table - 16384
• ARP table - 1000
• VLAN table - 4094
• L2 Multicast groups (IGMP Snooping) - 1023
• L3 Multicast groups (IGMP proxy) - 512
• SQinQ rules - 1024(ingress)/512(egress)
• MAC ACL rules - 509
• IPv4/IPv6 ACL rules - 384/192
• L3 IPv4 Unicast routes - 496
• L3 IPv6 Unicast routes - 124
• VRRP routers - 32
• L3 interfaces - 20 VLANs, up to 5 IPv4 addresses per VLAN, up to 124IРv6 GUAs for all VLANs in summary
• Link Aggregation Groups (LAG) - 24 groups, up to 8 ports in one LAG
• Quality of Service (QoS) - 8 egress queues per port
• Jumbo frames - maximum packet size is 12288 bytes

Interface features

• Head-of-line blocking (HOL) protection
• Auto MDI/MDIX
• Jumbo frames
• Flow control (IEEE 802.3X)
• Port mirroring (SPAN, RSPAN)

МAC table

• Independent learning mode per VLAN
• MAC Multicast Support
• Configurable aging time of MAC addresses
• Static MAC Entries
• MAC change events monitoring per ports
• MAC Flapping

VLAN features

• Voice VLAN
• IEEE 802.1Q
• Q-in-Q
• Selective Q-in-Q
• GVRP
• MAC-based VLAN
• Protocol-based VLAN

L2 Multicast features

• Multicast profiles
• Static Multicast groups
• IGMP Snooping v1,2,3
• IGMP Snooping fast-leave
• IGMP proxy-report
• IGMP authorization via RADIUS
• MLD Snooping v1,2
• MLD Snooping fast-leave
• IGMP Querier
• MVR

L2 features

• STP (Spanning Tree Protocol, IEEE 802.1d)
• RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
• MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
• Rapid-PVST+
• STP Root Guard
• STP Loop Guard
• STP BPDU Guard
• BPDU Filtering
• Spanning Tree Fast Link option
• Layer 2 Protocol Tunneling (L2PT)
• Loopback Detection (LBD)
• Port isolation
• Storm Control for different traffic types (broadcast, multicast, unknown unicast)
• ERPS (G.8032v2)

L3 Multicast features

• IGMP proxy (RFC 4605)
• IGMP proxy fast-leave

L3 features

• Static IPv4, IPv6 routes
• Dynamic routing protocols RIPv1/2, OSPFv2/3
• VRRP protocol

Link Aggregation functions

• Static LAG
• Dynamic LAG (LACP)
• LAG Balancing Algorithm

Service functions

• Virtual Cable Testing (VCT)
• Optical Transceiver Diagnostics

IРv6

• IPv6 Host
• IPv4, IРv6 dual stack

Security functions

• DHCP Snooping
• DHCP Option 82
• IP Source Guard
• Dynamic ARP Inspection (Protection)
• MAC-based authentication, Port Security, Static MAC entries
• Port-based authentication IEEE 802.1x
• Guest VLAN
• DoS attacks prevention
• Traffic segmentation
• DHCP clients filtering
• BPDU attacks prevention
• PPPoE Intermediate agent
• DHCPv6 Snooping
• IPv6 Source Guard
• IPv6 ND Inspection
• IPv6 RA Guard

ACL (Access Control Lists)

• L2-L3-L4 ACL (Access Control List)
• IPv6 ACL
• ACL based on:
• Switch port
• IEEE 802.1p priority
• VLAN ID
• EtherType
• DSCP
• IP protocol type
• TCP/UDP port number
• User Defined Bytes

Quality of Service (QoS) and rate limiting

• Port rate limiting (shaping, policing)
• IEEE 802.1p Class of Service (CoS)
• Queue scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
• ACL-based traffic classification
• ACL-based CoS/DSCP mark assignment
• CoS to DSCP remarking
• DSCP to CoS remarking
• ACL-based VLAN assignment

ОАМ

• IEEE 802.3ah, Ethernet OAM
• IEEE 802.3ah Unidirectional Link Detection (UDLD)

Main management functions

• Download and upload of configuration file via TFTP/SFTP
• Automated backup of configuration file via TFTP/SFTP
• Simple Network Management Protocol (SNMP)
• Command Line Interface (CLI)
• Web interface
• Syslog
• SNTP (Simple Network Time Protocol)
• Traceroute
• LLDP (IEEE 802.1ab) + LLDP MED
• Processing of management traffic with two IEEE 802.1Q headers
• Authorization of entered commands using TACACS+ server
• IPv4/IPv6 ACL support for device management
• Switch access management — privilege levels for users
• Management interface blocking
• Local authentication
• IP addresses filtering for SNMP
• RADIUS, TACACS+ (Terminal Access Controller Access Control System) clients
• SSH, Telnet client
• Telnet, SSH server
• Macrocommands
• Input commands logging via TACACS+
• DHCP autoprovision
• DHCP Relay (IРv4 support)